GREENMAX Foam Hydraulic Compactor Heracles
GREENMAX Heracles hydraulic compactor compresses loose foam into dense blocks without heating. It is designed for businesses handling bulky foam packaging, production offcuts and suitable foam dust that would otherwise occupy substantial storage and transport space.
Foam is crushed, fed into the compaction unit and compressed into dense blocks by hydraulic pressure without heating, making it easier to store and transport. The pre-crusher, hopper and compaction unit can be arranged to suit the available floor space. Automatic operation reduces manual intervention, while operators handle feeding, monitoring and routine checks.
Technical Data
| Parameter | Specification |
|---|---|
| Model | H-C300 |
| Compaction method | Hydraulic pressing without heating |
| Processing capacity | 200–300 kg/h |
| Compression ratio | Up to 70:1 |
| Compacted EPS density | Approximately 300–380 kg/m³ |
| EPS block cross-section | 390 × 420 mm |
Applicable Material
Hydraulic compactor handles EPS protective packaging, foam boxes, production offcuts, and dust or small particles from foam processing. It can also process suitable PU production scraps and EPP packaging or moulding scraps, with material testing recommended to confirm suitability and compression performance.
EPS Foam:
EPS Dust:
PU Foam:
EPP Foam:
Foam Hydraulic Compactor Advantages
·No heating, lower power consumption·Low Labor, intelligent, less one labor involved
·High density, compacted blocks can achieve up to 300-380kgs/m3
·High Throughput, throughput of 200~300kg/hour
Hydraulic Compactor Operation Video
FAQ
1. Does the hydraulic compactor melt the foam?
No. The machine uses hydraulic pressure to form compacted blocks without a heating stage.
2. How does it differ from a screw foam compactor?
A hydraulic compactor uses a hydraulic pressing stage to form blocks. A screw compactor relies on screw compression. The choice depends on the material, required output density, throughput and site layout.
3. What information is needed to select a machine?
Provide the foam type, photographs, approximate daily volume or weight, largest piece dimensions and available floor space. Material samples can help confirm suitability and expected processing performance.

